An ADSL Broadband Setup - Without Wireless
In the image below, you'll see a typical scenario of one PC connected to the phone line via a ADSL modem. (ADSL broadband is the one that goes down your BT phone line, if you're in the UK. If you have cable broadband then it won't.)If you request a web page from your computer, the signal goes down the red wire to the modem. It then travels through the blue wire, and down your phone line. The image below shows this (the yellow signal):
When the web page is found on the internet, it is sent
down the blue wire, through the modem, then the red wire, and to your
PC. Here's a new image:
To go wireless, the bit you get rid of is the ADSL modem
(the one on the floor in the image, with the red and blue wires plugged
in to it). You'll swap this with something called a Wireless Router.
This can have the ADSL modem built in.
An ADSL Broadband Setup - Wireless
In the next image, the red wire is gone. It's wireless! You are requesting a web page from the internet. Notice the yellow signal. Now it doesn't need to travel down the red wire. (It still needs to travel through the blue wire, though.) It travels through the air to the modem (now a ADSL wireless router), and then down the blue wire:
When the web page is found on the internet, the signal
travels through the blue wire, and then to the modem (or ADSL wireless
router, as we're now calling it). After the modem, the signal travels
through the air to your PC.
The great thing about wireless is that the PC doesn't
need to be as close to the wireless router as it is in the image above.
It can be right across the room, in another room entirely or, if you're
really lucky, at the bottom of the garden! There is something else you
do need, however, as well as the wireless router - a wireless adaptor.
We'll see what these are in the next part.
0 comments
Post a Comment